Valve extension
Valve extensions are the solution for hard-to-reach valves, for example on truck dual tyres or on earthmoving machinery (EM). In this category you will find rigid and flexible valve extensions in various lengths and materials.
This keeps the inner wheel quickly accessible as well – for pressure checks and inflation without any conversion work.
Truck valve extensions – the solution for hard-to-reach valves
On truck dual tyres, the valve of the inner wheel is positioned so awkwardly that checking and inflating becomes a test of patience. Valve extensions move the valve connection to the outside – this allows the tyre pressure to be checked quickly and regularly. That pays off directly: incorrect tyre pressure means increased tyre wear, rising rolling resistance and higher fuel consumption.
- Application: truck dual tyres
- Version: rigid & flexible
- Fit: the length depends on the wheel configuration (distance between the rim centres)
- Suitable for: all standard valve sizes (8V1); do not use with rubber valves
Suitable valve extensions in various shapes and materials are also available for hard-to-reach earthmoving machinery valves (12V1).
Valve extension versions at a glance
Highly flexible
- Material: with fabric sheathing
- Flexibility: 100 %
- Extension insert: sealing
- Pressure range: up to 20 bar
- Pressure resistance/burst pressure: 70 bar
- Professional installation: with clamping bracket
- Breakage resistance: very high
Flexible
- Material: with steel sheathing
- Flexibility: 95 %
- Extension insert: sealing
- Pressure range: up to 20 bar
- Pressure resistance/burst pressure: 120 bar
- Professional installation: with clamping bracket
- Breakage resistance: very high
Rigid
- Material: plastic or brass
- Flexibility: 0 %
- Extension insert: non-sealing
- Pressure range: pressureless
- Pressure resistance/burst pressure: 150 bar
- Professional installation: can be used without a holder
- Breakage resistance: low
For confined installation situations, rigid versions are additionally available angled at 45° and 90°.
How to find the right valve extension
- Clarify the installation situation: Is the valve accessible in a straight line or is an angled version (45°/90°) required?
- Determine the length: The decisive factor is the distance between the rim centres. Please pay attention to the effective extension – it is shorter than the overall length (example: 170 mm overall length = 152.5 mm effective).
- Choose the version: rigid for maximum pressure resistance without a holder, flexible or highly flexible for difficult access and high breakage resistance.
- Check the valve type: suitable for all standard valve sizes (8V1) – not in combination with rubber valves.
Installation notes
- The rim hole must be free of sharp edges – otherwise the extension can be damaged while driving.
- Flexible extensions are pressurised (up to 20 bar): do not kink them and do not let them rest against the rim hole.
- Flexible and highly flexible versions are installed with a clamping bracket (depending on the article, also with a clamping spring or an articulated clamping bracket).
- Rigid versions can be used without a holder – a support tube provides additional stability.
Application notes
- Select the appropriate length.
- Valve extensions remain permanently screwed onto the valve.
- Valve extensions are not suitable for rubber valves.
- The valve core remains in the valve.
Support tubes – additional support for rigid valve extensions
Support tubes give rigid valve extensions additional stability and make installation easier. Their advantages:
- More stability
- Higher breakage resistance
- Easier installation thanks to the guidance of the support tube
The illustration shows a valve extension with and one without a support tube in direct comparison.
- Support tube
- Thread