Skip to main content Skip to search Skip to main navigation

Air chucks in tyre service


The air chuck transfers the compressed air from the supply side to the tyre valve. The key selection criteria are the closing mechanism, the connection to your existing equipment as well as shape and length. All chucks in this category are made of brass and are nickel-plated.

Key features at a glance


Closed end or open end? The key difference


Closed end – green handle

  • Self-closing after being removed from the tyre valve – no air can escape.
  • When pushed onto the valve, the chuck opens and air flows into the tyre.
  • For a direct air supply from a main line, for example from the compressor.

Open end – black handle

  • Permanently open even after being removed from the tyre valve – air can escape.
  • For use on devices with a pressure gauge, for example a tyre inflator.
  • This allows the pressure gauge to return to a depressurised state after use.
In short: Direct line from the compressor → closed end (green handle). Device with pressure gauge → open end (black handle).
For versions without a handle, please refer to the product description for the mechanism.

Frequently asked questions about air chucks

The air chuck is the connecting piece between the air supply – such as a compressor line, an air hose or a tyre inflator – and the tyre valve. When it is pushed onto the valve, the mechanism opens so that air can flow into the tyre.

A chuck with a “closed end” function is self-closing once it has been removed from the tyre valve, so that no more air can escape. This mechanism is used for a direct air supply from a main line, for example from the compressor.

A chuck with an “open end” function remains permanently open even after it has been removed from the tyre valve, so that air can escape. The open mechanism is required for use with application devices – for example a tyre inflator with a pressure gauge – so that the pressure gauge can return to its normal, depressurised state after use.

By the colour of the handle: a green handle stands for closed end (self-closing), a black handle for open end (permanently open). For versions without a handle, please refer to the respective product description for the mechanism.

Female thread R1/4″, male thread 8V1 and hose connection.

The range includes versions for cars and trucks as well as combined universal versions that additionally cover bicycle valves – depending on the item, Blitz/Dunlop valve or Blitz valve and Presta.

The air chucks in this category are made of brass and are nickel-plated.

The shaft lengths of the listed air chucks range from 170 mm to 360 mm.