Balancing weights
Directly from the manufacturer.
Whether weights in OE quality or universally applicable versions – with us you will find the right balance weight for every rim and every application.
Our range comprises clip-on weights, adhesive weights, safety weights, spoke weights, balancing powder and springs for safety weights – directly from the manufacturer, so that your workshop is reliably supplied at all times.
Filter products
Range by weight type
Clip-on weights
Adhesive weights
Safety weights
Spoke weights
Balancing powder
Making the right choice
| Weight type | Vehicle | Material | Colour | Rim type | Weight sizes |
|---|---|---|---|---|---|
| Adhesive weight | Car / Truck / Motorcycle | Lead / Steel / Zinc | Grey / Green / Orange / Red / Black / Silver / Glossy silver / Chrome | Steel rims, alloy rims | 5 g – 300 g |
| Clip-on weight | Car / Truck / Van | Zinc / Lead / Steel | Grey / Black / Silver / Glossy silver | Steel rims, alloy rims | 5 g – 300 g |
| Balancing powder | Truck | Balancing powder granules | Red | Steel rims, alloy rims | – |
| Spoke weight | Motorcycle / Scooter | Zinc | Silver | Spokes | 5 g – 20 g |
| Safety weight | Car / Van | Zinc / Plastic | Silver | Steel rims, alloy rims | 5 g – 60 g |
By vehicle type
Cars & vans
Trucks
Motorcycles
FAQ balance weights
In every tyre, whether old or new, there are small irregularities that throw the tyre out of balance. These differences are generally very small, but while driving the radial force creates an imbalance. This then becomes noticeable in the driving comfort. The steering wheel or even the entire vehicle vibrates. There are two different types of imbalance: static and dynamic imbalance.
Static imbalance
Static imbalance means that the tyre moves up and down because there is a weight difference on the underside of the tyre compared with the top. As the tyre rolls, the forces are not distributed correctly and the tyre oscillates vertically up and down. When the tyre rotates faster, this effect is intensified. This usually shows itself as a vibration of the entire vehicle.
Dynamic imbalance
Dynamic imbalance occurs when irregularities of the tyre are present in the horizontal plane. For example, when the left-hand side of the tyre is heavier than the right-hand side. Here, too, the effect increases at higher speeds. This is then noticeable above all through vibrations in the steering wheel.
Balance weights are weights that are mounted on a rim in order to compensate for the irregularities of the tyre. This imbalance is measured with a balancing machine. This machine rotates the entire wheel (rim + tyre) and then measures how the forces are distributed. In the event of an imbalance, it then indicates exactly how much weight must be applied at which point on the rim.
Clip-on weights
A weight made of zinc, steel or lead with a pre-formed clip that is hammered onto the rim flange. Particularly suitable for steel rims.
Adhesive weights
A weight made of zinc, steel or lead with an adhesive strip that is simply stuck to the inside of the rim. Used especially for aluminium rims.
Securing weights / 2-piece safety weights
Securing weights are made of zinc, steel or plastic and must be fitted with a special tool. The 2-piece weight is similar to a clip-on weight without a clip. The separate clip and the weight are attached to the rim flange with pliers. Unlike clip-on weights, there is no risk of damaging the rim and it can therefore also be used on aluminium rims.
Spoke weights
Spoke weights are designed for motorcycle wheels. The weight is clamped around the spokes of the wheel with pliers.
Balancing powder / balancing sand
Balancing powder can be used to balance truck tyres. The powder or granulate is applied to the inside of the tyre during mounting. While driving, the powder distributes freely inside the tyre and accumulates in possible irregularities.