Earthmoving Machinery Valves
For earthmoving machines, heavy-duty trucks, large-capacity dump trucks, dumpers, loading, conveying and grading equipment as well as cranes.
Valves on earthmover tyres are exposed to high loads. In this category you will find valve upper parts without rim base, rim valves with rim base, valve extensions for hard-to-reach positions and matching accessories – in each case for the 20.5 + 0.5 mm valve hole.
Discover our earthmover valves from ALLIGATOR and HOFMANN POWER WEIGHT – with and without a protective sleeve.
Valve - clamp-in, TRJ650-03, V5.04.1, assembled, construction vehicle
Earthmover valves at a glance
On earthmoving machines, tyre pressure is the actual load-bearing structure – and the valve is the only connection to the outside. It has to hold the inflation pressure safely over long service lives, withstand vibration, impacts and temperature changes and seal reliably against dust, moisture and bulk material. What counts is therefore maximum pressure stability under extreme loads: earthmover valves are of solid design and bolted firmly to the rim.
All earthmover valves in this category are designed for tubeless earthmover tyres, fit the rim hole 20.5 + 0.5 mm and are available in two designs:
Valve upper parts – without rim base
The service part: fitted directly onto the valve base. Quick change of length or replacement of a defective valve without removing the base.
- Design: without base
- Tightening torque, union nut: 8 – 9 Nm
- various lengths and bend angles
Rim valves – with rim base
The complete unit: rim valve with base – for new installations and for a complete valve replacement on the earthmover wheel.
- Design: with base
- Tightening torque: 20 – 23 Nm
- various lengths and bend angles
With or without a protective sleeve?
Both designs are available with and without a protective sleeve. The protective sleeve is a casing around the valve stem. It protects the valve from mechanical stress in tough applications – for example from rock, bulk material or contact with foreign objects – and keeps dirt away from the stem. It is recommended wherever the valve is exposed and can be struck. If, on the other hand, there is little space on the wheel, for example with a narrow rim recess, the slim version without a protective sleeve is the better choice: it is more compact and can be fitted safely in confined positions.
In addition, we offer valve extensions for hard-to-reach earthmover valves – rigid brass versions with support tube as well as flexible rubber versions, optionally with steel braid – and matching accessories such as valve caps and valve cores, adapters, lever-type and push-on air chucks for 12V1 as well as valve fishers as a fitting aid.
Using the valve fisher
- Guide the head of the valve fisher through the valve hole and screw it onto the valve.
- After fitting the tyre, pull the valve into the valve hole and bring it into the correct position.
- The handle can also be used as a wrench for standard valve cores.