Skip to main content Skip to search Skip to main navigation

Three series of automotive tire inflators at a glance


Choosing the right connector and hose length


Whether a tire inflator proves itself in everyday use is decided not only by the pressure gauge, but also by the connector and the hose length. The following overview helps with the selection.

Available hose lengths

The tire inflators are available with hose lengths of 0.5 m, 1 m, 1.5 m, 3 m and 6 m. The GATOR INFLATOR MAX is available with a swivel hose in 0.5 m and 1 m, the GATOR INFLATOR MID DIGITAL with 1.0 m and a push-on chuck.

Bicycle: tire pressure gauge with quick coupling


For bicycle service we offer the swivel tire pressure gauge with quick coupling – also available with a Swiss quick coupling.

Thanks to the swivel connection head, the valve can be inflated in any position; tools are changed via the quick coupling on the hose. The pressure gauge remains readable in every valve position, and the plastic housing is impact-resistant and rugged.

Suitable for bicycle and automotive valves.

Frequently asked questions about tire inflators

The tire inflators are available with hose lengths of 0.5 m, 1 m, 1.5 m, 3 m and 6 m. Push-on chucks, clip-on chucks, service-station chucks and the QUIK-LOK connector are available as connectors. The GATOR INFLATOR MID DIGITAL is equipped with a standard workshop coupling (7.2 mm nominal bore). For bicycle service there are also swivel tire pressure gauges with a quick coupling as well as with a Swiss quick coupling.

The professional instruments comply with the harmonised European standard DIN EN 12645:2014 for tire pressure gauges and are conformity-assessed and type-examined. Please note the details given for each individual item, as the range includes officially verified, verifiable and non-verified versions.

The validity of the verification begins at the end of the calendar year in which the instrument was placed on the market. The first two digits on the verification seal indicate this year. Example: “26” on the verification seal means the year 2026 and therefore valid until 31 December 2028. For tire inflators the verification period is two years.

No. A calibration is a voluntary precision measurement and does not replace official verification. For commercial measurements – that is, every tire pressure measurement carried out for customers – official verification is required. The CE marking does not replace verification either; it is a manufacturer’s declaration of compliance with the EU requirements.