Balancing powder
Fill it in. Drive off. Balanced.
Balancing powder is the alternative to conventional balancing of truck and off-road tyres with wheel weights: you fill a portion into the tyre before mounting – physics does the rest. The compensating mass distributes itself along the inner wall of the tyre while driving, positions itself opposite the heavy spot and compensates for the imbalance – even when the imbalance changes over time due to wear.
What balancing powder does for you
For workshops
- No weights
- No balancing machine
- No rebalancing
Less effort, lower costs.
For fleet operators
- Tyres and chassis last longer
- The ride becomes smoother
- Less downtime, more kilometres
Happier drivers and passengers.
How does balancing powder work?
A portion of balancing powder goes into the tyre before mounting. As soon as the wheel starts rolling, the powder distributes itself – exactly where it is needed: opposite the imbalance.
Balancing powder works in two ways:
- It compensates the imbalance continuously. Thanks to its flexible positioning, it automatically absorbs changing imbalances – caused by wear, for example.
- It dampens. The damping effect reduces vibrations while driving.
The principle behind it: centrifugal force
When a wheel rotates, all masses are pushed outwards – the faster it turns, the stronger the effect. In the case of an imbalance, the heavy spot pulls particularly hard and makes the wheel wobble. Balancing powder follows the same principle, but positions itself automatically where the forces are lowest. As a result, the forces cancel each other out – and the wheel runs smoothly again.
How to recognise good balancing powder
The principle sounds simple – and it is. Provided that the quality of the powder is right. You should check these four points:
Gentle on the tyre
Soft, coated powder does not roughen the tyre from the inside – the tyre remains suitable for retreading.
Copes with moisture
If the powder clumps when damp, it no longer works. Good powder stays free-flowing.
Compatible with TPMS
Good powder affects neither the sensors nor the valves inside the tyre and is generally suitable for TPMS.*
Independently tested
Genuine test results from recognised institutes say more than mere advertising promises.
*As sensor manufacturers do not issue general approvals for tyre filling media across products, we recommend consulting the respective sensor manufacturer before use.
See for yourself how easy it is
Independently tested: balancing powder and TPMS
The compatibility of our balancing powder (type 505 / 504) with direct-measuring tyre pressure monitoring systems (TPMS) was successfully tested by an independent testing institute, the state materials testing institute (MPA) Darmstadt. During a demanding high-speed test as well as acceleration and braking tests (based on ECE 54 / ECE 109, 48 hours each), an OEM TPMS sensor installed in the tyre continued to operate completely trouble-free after the tests had been completed and showed no wear whatsoever on its housing.
Please note: As sensor manufacturers do not issue general approvals for tyre filling media across products, we recommend consulting the respective sensor manufacturer before use. The MPA test result refers to the OEM test setup that was tested.
Which variant suits your business?
HOFMANN POWER WEIGHT balancing powder is available in two variants: pre-portioned in a self-dissolving bag or loose for dosing it yourself. Both bring the wheel into balance – the difference lies in the handling and in the effect against dynamic imbalance.
| Feature | Type 504 | Type 505 |
|---|---|---|
| Packaging unit | 6 kg box or 8 kg bucket | practical PE bag (XS–XL) |
| Pre-dosed? | No | Yes |
| Against static imbalance | Yes | Yes |
| Against dynamic imbalance | No | Yes |
| Filling | via funnel | in a self-dissolving bag |
| Valve core included? | No | Yes |
Fusion Technology – the plus of type 505
Type 505 works with two grain sizes: large, red grains concentrate in the centre of the tyre and compensate for static imbalance. Small, blue grains move outwards and reduce the wobbling caused by dynamic imbalance.
The result: better flow behaviour, more even distribution inside the tyre – and an effect against static and dynamic imbalances.
How to use balancing powder
No more complicated weighing: download the filling quantity chart and find the right dosage.
Instructions type 504
-
Apply mounting paste sparingly to avoid any sticking.
-
Determine the correct dosage using the filling quantity chart.
-
Use the dosing spoon to fill the correct quantity of balancing powder into the unmounted tyre.
-
Replace the valve core and screw on the special indicator valve cap*.
Instructions type 505
-
Apply mounting paste sparingly to avoid any sticking.
-
Choose the correct bag based on the tyre size and our chart.
-
Detach the small perforated section containing the valve core and valve cap. Simply place the bag into the tyre to be mounted. The bag dissolves by itself.
-
Replace the valve core and screw on the special indicator valve cap*.
*Indicates that balancing powder is present in the tyre. Prevents unpleasant surprises during demounting and prevents balancing particles from entering the valve.
Frequently asked questions
No. The powder compensates the imbalance continuously – rebalancing is not required.
For medium and heavy trucks, buses and off-road vehicles. Particularly suitable for high-mileage drivers and fleets: less workshop time, more even wear and less running noise.
Good balancing powder is generally compatible with TPMS. However, as sensor manufacturers do not issue general approvals across products, we recommend consulting the respective sensor manufacturer before use to be on the safe side.
Good powder stays free-flowing and does not clump. With cheap products, the powder can clump when damp and then works less effectively.
Yes. The powder works individually in each tyre.
Good balancing powder does not damage the inner liner. When changing the tyre, you simply collect the powder – the tyre can be processed further as usual.
No.