TPMS service kit
In this category you will find the right TPMS service kits for replacing the wear parts on the TPMS valve professionally at every tyre change – for safety and the full functionality of the tyre pressure monitoring system. With the Universal Service Kit U1 you cover 97 % of all metal valves with just one kit.
Filter products
Why TPMS service kits?
Just like the rubber valve, the wear parts of the TPMS sensor (rubber seal, valve nut, valve core & valve cap) should also be replaced professionally at every tyre change. This ensures safety, prevents failures and avoids major consequential damage – for example the complete replacement of the sensor due to a seized, corroded valve core. Regular TPMS servicing therefore ensures a high level of safety and reliability and is strongly recommended by manufacturers and industry organisations. Under EU Directive 2014/45/EU, which has been in force since 20 May 2018, a non-functioning TPMS is classified as a major defect at the periodic roadworthiness test.
Components of a TPMS service kit
A TPMS service kit usually contains the following parts:
- Valve nut
- Valve cap
- Valve core
- Seal
- Some service kits additionally contain O-rings in four different colours.
The coloured O-rings are fitted to the outside of the valve nut and identify the position of each individual wheel:
- Green = front left
- Yellow = front right
- Red = rear left
- Black = rear right
The TPMS refill packs allow individual TPMS service kit types to be ordered. Each refill pack contains 20 service kits of one specific type.
Universal Service Kit U1 – 97 % market coverage for metal valves
Our development engineers have identified the most frequently used service parts and combined them in a single kit. As a result, the Universal Service Kit U1 (item no. 0401-0022-482) can be used with most metal valves.
- 97 % market coverage for metal valves
- Universal solution for 36 different service kits
- Avoidance of lost sales due to missing service kits
- Reduction of unused stock
- Cost savings by reducing the variety of service kits
- Simplified handling and application
Using the enclosed instructions, you can quickly and easily identify the correct spare parts for the service – the parts that are not required are disposed of. For valves that cannot be serviced with the Universal Service Kit U1, please use the appropriate OE service kit.
Frequently asked questions about TPMS service kits
Just like the rubber valve, the wear parts of the TPMS sensor (rubber seal, valve nut, valve core & valve cap) should also be replaced professionally at every tyre change. This ensures safety, prevents failures and avoids major consequential damage – for example the complete replacement of the sensor due to a seized, corroded valve core. TPMS servicing is strongly recommended by manufacturers and industry organisations. Under EU Directive 2014/45/EU (in force since 20 May 2018), a non-functioning TPMS is classified as a major defect at the periodic roadworthiness test.
A TPMS service kit usually contains a valve nut, a valve cap, a valve core and a seal. Some service kits additionally contain O-rings in four different colours.
The coloured O-rings are fitted to the outside of the valve nut and identify the position of each individual wheel: green = front left, yellow = front right, red = rear left, black = rear right.
The Universal Service Kit U1 (item no. 0401-0022-482) combines the most frequently used service parts in one kit. It covers 97 % of the metal valves of TPMS sensors and replaces 36 different service kits. Using the instructions, you can quickly identify the correct spare parts; parts that are not required are disposed of. For valves that cannot be serviced with the U1, please use the appropriate OE service kit.
Failures are usually caused by corrosion of the metal parts or embrittlement of the rubber seal. Possible consequences are damage to and replacement of the complete sensor, pressure loss in the tyre, a tyre breakdown and even loss of vehicle control.