Skip to main content Skip to search Skip to main navigation
Car driving on a road

Car valves

Car valves play a decisive role in the safety and performance of a vehicle. They ensure the correct tire pressure and prevent air from escaping.

In our web shop you will find a comprehensive selection of valves for car tires that meet the highest quality standards and are ideally suited to everyday use in the workshop.

Discover our rubber and metal valves now and rely on quality and reliability – for the safety and satisfaction of your customers.

Frequently asked questions about car valves

Rubber valves (snap-in) are ideal for standard cars in everyday workshop use: they are easy to fit by hand, are pressure resistant up to 4.5 bar and are approved for speeds of up to 210 km/h. Metal valves offer considerably more reserve with a pressure resistance of up to 14 bar and are therefore suitable for vehicles travelling at higher speeds. The CVV valves from ALLIGATOR combine both: they unite the high pressure resistance (up to 7 bar) of a metal valve with the easy manual fitting of a snap-in valve.

TR413 and TR414 are among the most common car valves and cover the most frequently used rims. The difference lies in the length: the TR413 has a standard length of 43 mm, the TR414 of 49 mm. Which length is suitable depends on the rim thickness – the valve must not protrude beyond the rim, but it should also not be too short. Both are available as an OE premium line and as an aftermarket line as well as in the versions assembled, partly assembled and unassembled.

The suitable valve length depends on the rim thickness. For safety reasons, the rubber valve must not protrude beyond the rim, but it should also not be too short, so that inflating, for example, remains easily possible. Snap-in valves are suitable for rim thicknesses from 1.8 mm to 4 mm.

We recommend checking and replacing the valves at every tire change. Pay particular attention to whether the rubber is brittle, whether there is corrosion on the valve core or whether the valve is damaged. Defective valves can lead to pressure loss – with consequences such as increased tire wear, higher fuel consumption, a longer braking distance and, in the worst case, loss of control over the vehicle.

The terms describe the delivery condition of the valve: Assembled means that the valve core and valve cap are already fitted. Partly assembled means that the valve core is fitted and the cap is enclosed separately. Unassembled means that the valve core and cap are supplied separately.

The valve hole must be round (not oval) and have the matching diameter (usually 11.3 +0.4 mm). It must be free of burrs and damage and must comply with ETRTO regulations. The rim thickness should be at least 1.8 mm and no more than 4 mm.