PURCHASE ORDER
General Terms and Conditions
WEGMANN automotive USA Inc. (“Buyer”)
1. ACCEPTANCE - Commencement of performance pursuant to this purchase order constitutes acceptance by Seller. If delivery dates cannot be met, Seller shall inform Buyer in writing of Seller’s best possible delivery date(s) for Buyer’s acceptance in its sole discretion.
2. ENTIRE AGREEMENT - These terms and conditions are part of this purchase order (including any referenced drawings, specifications and other documents) and contain the entire agreement between Buyer and Seller with respect to this order, subject to any master agreement between Buyer and Seller.
3. PRICES - Seller’s price shall not be higher than last quoted or last charged to Buyer unless otherwise agreed in writing.
4. QUANTITIES - Shipments must equal exact amounts ordered unless otherwise agreed by Buyer.
5. INVOICING; PROOF OF SHIPMENT - All invoices must be referenced in duplicate and sent to the billing address indicated in the purchase order. Seller agrees to attach proof of shipment to all applicable invoices and to mark all invoices and containers with order number, part number and quantity.
6. TERMS OF PAYMENT - Payment of Seller invoices will not be made until applicable purchased materials and shipping documents are received at specified destination. Any applicable discount periods shall begin on the date of receipt by Buyer of acceptable invoices and shipping documents, or date of material delivery to specified destination, whichever occurs later.
7. TAXES - Except as may be otherwise provided in this purchase order, the contract price includes all applicable federal, state, and local taxes in effect on the date of this purchase order. In case of new taxes or increased rates or the repeal of taxes or the reduction of rates, the contract price shall be adjusted accordingly.
8. WARRANTY - Seller warrants all materials or services delivered hereunder to be free from defect of material or workmanship and to conform strictly to the specifications, drawings, or sample specified or furnished. This warranty shall survive any inspection, delivery, acceptance, or payment by Buyer of the materials or services.
9. CHANGES - Buyer shall have the right at its sole discretion from time to time, by written change notice to Seller, to make changes in, or additions to drawings, specifications, instructions, quantities or deliveries for materials or services covered by this purchase order, and Seller agrees to comply with such change notices. If any such change notice causes material or performance cost increases or decreases, an equitable adjustment in price and delivery time will be negotiated between Buyer and Seller within ten days of Seller’s receipt of a change notice; provided that Buyer shall have no obligation to make any such adjustment in price or delivery time.
10. CANCELLATIONS - Buyer shall have the right in its sole discretion to terminate this purchase order in whole or part at any time by written notice to Seller. In the event of such termination and only when termination is not the result of Seller’s default hereunder, Buyer may assume the limited obligation for cost of materials and labor to Seller in accordance with the following options:
(A) Pre-production Labor-Upon Buyer’s receipt of written documentation establishing the cost involved, Buyer may be responsible for direct labor cost authorized by Buyer and generated by Seller specifically for this purchase order, pro-rated over the current total order quantity.
(B) Raw materials-Upon Buyer’s receipt of written documentation establishing the cost involved, Buyer may be responsible for the cost of applicable raw material stock purchased by Seller specifically for this purchase order. In the case of raw material stock which Seller has on firm sub-contract order to fulfill this purchase order, Buyer may at its sole option take an assignment of Seller’s obligations under such orders.
(C) Semi-processed Materials-Upon Buyer’s receipt of written documentation establishing the cost involved, Buyer may be responsible for semi-processed materials applicable to this purchase order at a proportion of the respective contract price (which Seller shall furnish to Buyer) based on the stage of completion of such materials.
(D) Finished Materials-Buyer may be responsible for finished materials at contract price.
(E) General-Buyer responsibility for labor and materials as outlined above is limited to those quantities released by Buyer for manufacture and delivery within a reasonable future time period. All termination cost claimed by Seller shall be documented in writing and submitted to Buyer. All materials and results of all labor paid for by Buyer pursuant to this Paragraph 10 shall become the exclusive property of Buyer.
(F) Cap on Buyer’s Cost. In no instance shall total termination cost to Buyer under this Paragraph 10 exceed the total contract price for the applicable items set forth in the purchase order.
(G) This Paragraph 10 shall not limit any rights of Buyer to cancel this purchase order without penalty to Buyer. In the event of any proceedings, voluntary or involuntary, in bankruptcy or insolvency by or against Seller, the inability of Seller to meet its debts as they become due, or in the event of the appointment, with or without Seller’s consent, of an assignee for the benefit of creditors or of a receiver, then Buyer shall be entitled, at its sole option, to cancel any unfilled part of this purchase order without any liability whatsoever.
11. DEFAULT - Notwithstanding the provisions of Paragraph 10:
(A) Buyer may terminate this purchase order in whole or part by written notice of default to Seller in any of the following circumstances, subject to provisions of Paragraph 11 (B).
1. If Seller fails to make delivery of materials or to perform contracted services within the time period specified on the purchase order, or any written extension thereof; or
2. If Seller fails to perform any of the other provisions of this purchase order with such failure of performance endangering the timely supply of acceptable material or service; and
3. In either of these two circumstances, Seller does not make necessary corrections as determined by Buyer within a period of ten (10) days after receipt of notice from Buyer specifying such circumstances.
(B) In the event that Buyer terminates this purchase order as a result of Seller default as described in Paragraph 11 (A), Buyer may procure similar material or service from alternate sources as deemed suitable by Buyer. Seller shall promptly and with necessary care, package and ship Buyer-owned materials, tooling, specifications, or other properties as directed by Buyer in writing.
(C) Buyer retains the option of purchasing finished materials, partially finished materials, or raw materials applicable to any terminated purchase order. Pricing for any materials purchased under this option shall be negotiated by Seller and Buyer. Prices for raw materials shall be at Seller’s cost.
12. DELIVERY - Unless otherwise approved by Buyer delivery shall not be made more than 10 days prior to required date specified in this purchase order. Acceptance of advanced or past due shipments is optional with Buyer. Seller shall provide sufficient labor force and facilities, and shall work such hours as may be required to assure compliance with the established delivery dates in this purchase order.
13. SHIPMENTS - All shipments shall be made in accordance with instructions specified in this purchase order unless otherwise directed by Buyer. All shipments shall be made either (a) prepaid by Seller and applicable freight charges (FOB-ship point), including pertinent freight date shall be included on respective material invoice as a separate item or (b) F.O.B. destination with freight charges included in the material prices indicated in this purchase order with no further freight charges to Buyer will apply. Cost of any premium freight required by Buyer on past due shipments shall be the sole responsibility of Seller.
14. QUALITY AND INSPECTION; RIGHT OF RETURN - Except as otherwise agreed in writing, all materials or services must be as specified in this purchase order and acceptance will be subject to Buyer inspection. If, for any reason specifications are omitted or are incomplete according to Seller practices, Seller shall so advise Buyer before purchase order is processed and, in any case, material and workmanship must be free from any and all defects and must comply with applicable specifications, tolerances, and quality standards. Unless otherwise specified, all goods or services furnished hereunder may be subject to inspection by Buyer by means of either statistical sampling, utilization of material, or functional testing or use, or otherwise. If through failure to satisfy this inspection, material is found to require additional inspection, Seller shall be liable for such expenses incurred by the additional inspection, and for corrections made to the material at destination, as deemed necessary by Buyer. Buyer additionally reserves the right to return any materials rejected as non-conforming or otherwise defective in whole or part at Seller’s expense, including transportation and handling costs. Material replacement shall be optional at Buyer’s discretion. Buyer reserves the right to inspect applicable raw, in-process, or finished materials at Seller’s facility, with minimum a prior notice of 24 hours.
15. PATENTS - If any claim be made or suit brought against Buyer or Buyer’s immediate customer for infringement of any patent or patents of other because of the use or sale of the equipment or any part thereof purchased under this purchase order, then Seller, after receiving written notice of such claim or suit, defend, at Seller’s expense, Buyer, Buyer’s immediate customer and any related parties and indemnify them with respect to any and all claims that the products or materials furnished by Seller under this purchase order infringe any United States Letters Patent, and with respect to any and all suits, controversies, demands, and liabilities arising out of any such claim. In such event, Seller agrees, at its own expense, either to (a) procure for Buyer or its immediate customer the right to continue using said equipment or part, (b) replace the same with noninfringing equipment, (c) modify it in a manner satisfactory to Buyer or its immediate customer so the said equipment or part becomes non-infringing or (d) remove the equipment or part and refund to Buyer the purchase price including transportation and handling cost.
16. COMPLIANCE WITH LAWS - The performance of any work by Seller pursuant to this purchase order is and shall be subject in all respects to and in compliance with all laws, rules, regulations, and ordinances, proclamations, demands, directives, executive orders, or other requirements of the municipal, state, and federal governments and all subdivisions thereof which now govern or may hereafter govern the manufacture, sale, or delivery of the parts, supplies, and goods, contemplated by this purchase order, including, but not limited to the provisions of the Fair Labor Standards Act of 1938, the Walsh Healy Act, the Federal Food, Drug, and Cosmetics Act, and any other applicable laws.
17. LIENS - Seller agrees to deliver to Buyer all items covered by this purchase order free and clear of all liens, claims and encumbrances of any kind.
18. PACKAGING - Packing, packaging, boxing and cartage are included in material prices specified in this purchase order, and no additional charges for these services will be made to Buyer unless otherwise indicated in this purchase order.
19. ASSIGNMENT - Seller shall not delegate any duties, nor assign any rights or claims under this purchase order, or for breach thereof, without prior written consent of Buyer, and any such attempted delegation or assignment shall be void.
20. SUB-CONTRACTING - Seller shall not sub-contract any of the work to be performed by Seller under this purchase order without the prior written approval of Buyer, with the exception of procurement of raw materials or standard commercial parts.
21. PROPRIETARY RIGHTS - Seller understands and agrees that Buyer’s designs, specifications, formulas, and manufacturing information are proprietary data and shall not be utilized for purposes other than those intended in this purchase order.
22. BUYER-OWNED PROPERTY - The following provisions of this paragraph, unless otherwise agreed in writing, shall apply to any and all tools, tooling, patterns, equipment, materials, or other property used in the manufacture of goods for Buyer or in the performance of this purchase order, that are either supplied to Seller by Buyer or have been acquired by Seller and specifically paid for by Buyer. All such property will hereafter be referred to as Buyer-owned.
(A) Seller shall have the right to use Buyer-owned property without payment for usage as required in the performance of this purchase order, or other work for Buyer, but shall not use Buyer owned property in the performance of any other work without prior written approval of Buyer.
(B) Title to all Buyer owned property shall at all times remain with Buyer, whether or not such property is attached to real estate or other things. Title to such property which is procured or manufactured by Seller for Buyer shall be fully vested in Buyer upon payment for same by Buyer.
(C) Seller shall take necessary measures to preserve Buyer’s title to Buyer-owned property free of all encumbrances, Buyer retains the right, in addition to other rights provided by law, to enter Seller’s premises and remove Buyer-owned property with or without court order.
(D) Seller shall, on written request of Buyer, properly pack and ship Buyer-owned property to such destinations as designated by Buyer.
(E) Seller shall, at its expense, perform all maintenance work, repairs and replacements necessary with respect to applicable Buyer-owned property so that such property remains suitable for use intended.
(F) The risk of loss or damage to all Buyer-owned property shall be with Seller from the time when such property is delivered to Seller until that property is removed from Seller’s control as directed by Buyer in writing. Proof of adequate insurance coverage on Buyer-owned property shall be provided to Buyer by Seller upon request of Buyer.
(G) Buyer shall not be liable for loss, damage detention, or delay resulting from causes beyond its control, with respect to any Buyer-owned property to be delivered to Seller by Buyer.
(H) Seller shall indemnify, hold harmless and defend Buyer against any and all liability for damage to property or injury to or death of any persons arising from, or incidental to the presence of, Seller’s use of Buyer-owned property, whether such damage, injury or death be caused by defects in the property, negligence in the use thereof, or otherwise.
(I) Seller shall upon receipt of written request provide Buyer with current listing of Buyer- owned property in its possession, indicating complete description, quantities, and property condition.
23. INDEMNIFICATION BY SELLER - Seller will indemnify, hold harmless, and defend Buyer from all liability for loss, damage, or injury of any kind to person or property in any manner arising out of or incident to the performance of this purchase order.
24. CONFLICTING TERMS - If terms on this purchase order do not appear on or agree with Seller’s invoice as rendered, Seller agrees that Buyer may change invoice to conform to this purchase order and make payment accordingly.
25. GOVERNING LAW - This purchase order and the acceptance of it shall be a contract made in the State of Tennessee and governed by the laws thereof.
26. OTHER REQUIREMENTS
(A) Seller shall have full and exclusive liability for payment of any and all contributions or taxes for unemployment insurance, old age benefits, pension, or annuities now or hereafter imposed by Federal, State or Local Governments which are measured by wages, salaries, or other remunerations paid to persons employed by Seller on work performed under any purchase order to which these terms and conditions apply. Seller shall comply with all laws and regulations related to assumption of liability for such contributions and taxes, and shall reimburse Buyer for any such contributions or taxes which Buyer may be required to pay.
(B) With respect to any work performed on premises owned or controlled by Buyer, Seller shall provide safety protection for Seller’s employees on and around the project in accordance with all applicable Federal, State and Local laws and regulations prior to commencement of work. Should Seller fail to provide such protection, Buyer may terminate this purchase order without penalty to Buyer.
(C) Buyer at its option may require Seller to supply evidence of insurance, satisfactory to Buyer; however, failure of Buyer to request such evidence shall not relieve Seller of its responsibility to obtain such insurance.
(D) All items supplied under the terms of this purchase order shall be certified by Seller to be in compliance with the requirements and standards of the Occupational Safety & Health Act of 1970. In addition, as required by applicable law, required hazardous material data sheets will be supplied on any applicable products.
(E) The rights and remedies of Buyer provided in these terms and conditions shall not be exclusive and are in addition to those provided by law and at equity.
(F) Seller’s request for exceptions to these terms and conditions must be submitted to Buyer in writing. Additions to, deletions from, or modification of these terms and conditions shall be null and void unless specifically accepted by Buyer in writing.